Beta75X 2S Whoop FrSky BNF

CHF 149.00

Am Lager

Kategorie:

Beschreibung

More Overview Videos

SPECIFICATION

  • Weight: 41g (without battery)
  • Motors: 1103 11000KV with connector
  • Props: 40mm 4-blades props, 1.5mm shaft hole
  • Camera: Z02 AIO Camera 35 degree
  • Recommend battery: 300mAh 2S battery
  • Receiver: FrSky

FC SPECIFICATIONS

Find more details about this 2S F4 FC board  in another page.

  • CPU: STM32F405
  • Six-Axis: MPU6000
  • Size: 26mm x 26mm, whoop mounting pattern
  • Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
  • OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
  • Smart Audio port is available for radio control VTX

ESC SPECIFICATIONS

Find more details about this 2S ESC board in another page.

  • Support BLheli/BLHELI_S suite Pass-through ready
  • Dshot600 in default
  • Input voltage: 2S lipo
  • Cotinue current: 6A
  • Peak current: 10A
  • Firmware: BLHELI_S
  • Processor: SILABS EFM8BB21F16G

Z02 AIO Camera VTX

Find more details about this AIO Z02 camera VTX in another page. On the Beta75X, it is the customed version with VTX board and camera board split.

  • Output power: 0mW, 25mW and 200mW (Adjustable)
  • Smart Audio function is included for radio control
  • Antenna: Dipole ANT
  • Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
  • TV System: NTSC
  • Field of view: 100-120 degrees with 1/4 lens

PROPS OUT

The Beta75X drone comes with „props out“ in default. Why we need „props out“ direction?

Default Betaflight props direction, quadcopter dips and „washes out“ in hard corners. With reversed props or „props out“, no more dipping even in hardest cornering.

Know more about „Props Out“.

 

CUSTOMED Z02

The AIO camera VTX on the Beta75X is a customed version of Z02. The VTX board and camera board are split and 35 degree camera mount for more fast flying. At the same time, it have all the other function of the Z02 camera, like output power switchable between 0mW, 25mW and 200mW. Smart audio is available for VTX remote control in default.

How to change the frequncy or output power via remont control, please check the manual Smart Audio.

Download the STL file for the camera mount.

FAQ

1. About the LED at the rear for Beta75X

For the moment, the FC board doesn’t support programable LED like WS2812 etc. The LED holder is designed on the frame nowadays. So we will update the FC board on the next version and release the suitable LED board.

Note: there is NO rear LED holder for Beta65X in default.

2. I am interested in connecting an HD camera and DVR, but I don’t want to overload the circuit of 5V.

The 5V regulator on the FC board could handle 2A of load. So you could use it for HD camera or DVR board. More details, please check the FC board page.

3. Does this drone have current sensor?

This drone does NOT have a real current sensor. We use the virtual current meter in Betaflight. When properly calibrated, it can be accurate enough to be useful. Here is the pre-calibrated value out of the box.

set current_meter = VIRTUAL
set ibatv_scale = 90
set ibatv_offset = 29

4. How to connect the receiver to the 2S brushless FC?

Please don’t forget to plug the battery when you try to connect the connector to the 2S brushless FC. Find out more details in our support page.

5. Cli Dump for different versions of the 2S Whoop are provided in our support page.

PACKAGE

  • 1 * Beta75X BNF 2S Whoop Quadcopter
  • 1 * Spare 40mm 4-blades props (2CW+2CCW)
  • 1 * 350mAh 2S 35C-70C battery
  • 1 * Spare Canopy

Das könnte dir auch gefallen …