BumbleBee HD V1.3 CineWhoop BNF

CHF 399.90

NICHT am Lager

Kostenloser Versand in die Schweiz für dieses Produkt!

Kategorie:

Beschreibung

Features

– No Props or frame in view!

– High performance True-AIO Board SucceX-A (F4 FC + 40A BLHeli32 ESC) to save weight and space

– T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)

– Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)

– Low Resonance frame construction (Less Jello, more Cinematic)

DJI FPV Air Unit 720p 120fps FPV feed (record in 1080p/60fps)

– Butter smooth XING-C 1408 4S 3600KV / 6S 2800KV motors

– Bumper prop guards to protect the sensitive environment or yourself

– Pre-tuned with smooth freestyle settings

Changelog v1.3

– Duct height changed to 27mm

– Improved duct profile with less noise

– Added TPU bracket for DJI Air Unit

FACTORY SETUP and WIRING DIAGRAM:

Reflashed your drone but didn’t backup the setup? Messed up the whole tune and want our factory tune back?
No need to worry! All Factory Dumps and Wiring Diagrams can be found on our Google Drive: LINK

BumbleBee BNF Specs:

– SucceX-A F4/40A BLHeli32 true AIO board

– Motor: XING-C1408 4S 3600KV / 6S 2800KV (LINK)

– Wheelbase: 142mm

– Bottom plate thickness: 2mm

– Top plate thickness: 2mm

– Top and bottom plate spacing: 27mm (aluminum column height 27mm)

– Propeller size: 3 inch

– FC pattern: 20*20mm,30.5*30.5mm

– FPV cam spacing: 19mm

– Weight: 332g (without battery)

BumbleBee HD Quad BNF Included Components and Parts

prebuilt and tested Quadcopter

– 1x BumbleBee HD Frame

– 1x DJI FPV Camera

– 1x DJI FPV Air Unit Module

– 2x DJI FPV Air Unit Antenna SMA

– 1x TPU Bracket for DJI Air Unit Module

– 1x TPU Antenna holder for DJI antenna

– 2x TPU camera side plate soft mount

– 2x Nazgul 3040 propeller (Set of 4 – Color May Vary)

– 2x MMCX to RP-SMA Female Adapter Cable

– 1x iFlight Lipo Strap

Recommendation of battery

* Fullsend 4S 95C 1300mAh(5-6 minutes flight time w/GoPro Hero8)

* Fullsend 4S 95C 1550mAh(6-7 minutes flight time w/GoPro Hero8)

Additional Suggested Parts

*DJI HD FPV Goggles

*Radio Controller

*DJI Remote Controller (Mode 2)

*Battery (light indoor 4S 850mAh / more flight time outdoor 4S 1300mAh / 6S 1300mAh)

Important

The DJI Remote Controller is recommended for beginners since you won’t need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don’t choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter and then bind to your own radio as usual.

Dieses Produkt darf in der Schweiz nicht betrieben werden. Nicht für schweizer Kunden.

Menü