iFlight BLITZ F7 Pro Flight Controller

CHF 99.90

Am Lager, kann sofort verschickt werden.

Kategorie:

Beschreibung

Features
  • Improved circuit design, better components, and lower electrical noise!
  • DJI HD VTX Connector (Plug-and-Play / No soldering required)
  • FC indicator LEDs for visual debugging
  • 512MB BlackBox
  • With LC filter
Specifications
  • Mount pattern: 35*35mm/ 4mm PCB hole diameter
  • Smartaudio / IRC Tramp VTX protocol supported
  • Firmware target: IFLIGHT_BLITZ_F7_PRO
  • Input Voltage: 14.8V-34V (4S-8S LIPO)
  • Motor outputs: 4x (SH1.25 connector)
  • Flash: 512MB (Blackbox flash)
  • I2C serial: SDA / SLA pads
  • Dimensions: 41*41.5mm
  • Barometer: DPS310
  • OSD Chip: AT7456E
  • LED controller: Yes
  • MCU: STM32 F722
  • Weight: 17g (±2)
  • Beeper pad: Yes
  • Gyro: MPU6000
  • UARTS: 4
Wiring Suggestion
  • UART1 for VTX HD/Analog
  • UART2 for  Receiver
  • UART4 for GPS
  • UART5 for ESC Telemetry
  • 8×Dshot/PWM outputs
  • 1×I2C  for GPS Mag
Tips
  • 1. F722 MCU has an inner inverter.
  • 2. SBUS、CRSF、ELRS、IBUS、DSM ETC… can be connected to any unused UART_RX, we suggest you connect to Uart_RX2
  • 3. Frsky SmartPort, Tramp & Smartaudio can be connected to any unused UART_TX, we suggest you connect to Uart_TX1
  • 4. F.port can be connected to any unused UART_TX, we suggest you connect to Uart_TX2
Wiring diagram

https://drive.google.com/drive/folders/17Uf67I6ER_z-otviR0I7tSqO31W7S553

Menü