Suchresultate für "tbs crossfire"

TBS Crossfire 6ch PWM Adapter mit Stecker



CHF 5.90 CHF 2.90In den Warenkorb

With this board you can enable connectivities with your servos via 6ch PWM. SPECIFICATION Weight: 3.24g Size: 27 x 20 x 7mm (With Pins)

TBS Crossfire Nano RX Pro



CHF 34.90Weiterlesen

The TBS Crossfire Nano RX Pro is a higher telemetry output power option of the de-facto FPV standard receiver. It packs up to 500mW of output power, and will ensure that your 50km flights occur without ever losing telemetry. SPECIFICATIONS Weight: 0.5g (receiver only) Size: 11mm x 18mm Requires: Firmware V6.14 Input Power: +3.3V to…

TBS Crossfire Sixty9



CHF 54.90In den Warenkorb

What could be better than the best Crossfire receiver and an improved Unify Pro32 video transmitter making sweet love? Exactly! Nothing, nothing at all. Introducing the TBS Crossfire Sixty9, a VTx and RC receiver AIO board sporting a race-friendly, long-range capable video transmitter combined with the same on the TBS Crossfire side. Mounting holes are…

TBS Crossfire Micro/Nano RX Empfänger Antenne – Extended



CHF 4.90In den Warenkorb

Extended version of the TBS Crossfire Micro RX antenna. Snap on installation with the Standard U.FL. SPECIFICATION Total Length: 215mm Coax Cable Length: 140mm Weight: 0.67g

TBS Crossfire Micro TX Conversion Kit



CHF 5.90In den Warenkorb

This kit is for those who want to transfer their Crossfire Nano TX internals to the Micro casing. INCLUDES 1 x Top Case 2 x Botom Case 1 x JR Bay Pin Headers

TBS Crossfire 6ch PWM Nano RX



CHF 32.90In den Warenkorb

TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the minimum!). This version of the Nano RX has the PWN adapter…

TBS Crossfire/Tracer Nano RX 6ch PWM Adapter



CHF 5.90In den Warenkorb

With this board you can enable connectivities with your servos via 6ch PWM. SPECIFICATION Weight: 3.24g Size: 27 x 20 x 7mm (With Pins)

TBS Crossfire Micro TX V2 – Heat Sink



CHF 4.90Weiterlesen

Stick-on heatsink made for the TBS MicroTX V2 to keep it cool at high power output. *Will not fit into the NanoTX Case. INCLUDES 2 x Heatsink.

TBS Crossfire Nano TX – Retrofit Kit



CHF 7.90In den Warenkorb

This kit is for those who want to transfer their Micro TX V2 internals to the nano casing. *Will only work with Micro TX V2 hardware. INCLUDES 1 x Top Case 2 x Botom Case 1 x Adapter PCB 1 x Screw with washer DOWNLOADS STL for fullsize TX back case

TBS Crossfire Nano TX Starter Set



CHF 119.90Weiterlesen

or a long time, our goal has been to not only be the best performing, but also the most affordable LRS on the market. With the TBS Crossfire Nano TX Starter Set, we have achieved this goal! There is no better time to get into TBS Crossfire than now with the completely refreshed hardware design…

TBS Crossfire Nano TX



CHF 74.90In den Warenkorb

WHY NANO? The Nano TX is designed to be installed in X-lite and X9D Lite radios with the „Lite“ interface. Performance, functionalities, and even pricing will be the same as the Micro TX V2. A NEW ERA OF CONNECTIVITY The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable…

TBS Crossfire Immortal T Antenne V2 Extra Verlängert



CHF 6.90In den Warenkorb

THE EXTRA EXTENDED TBS IMMORTAL T V2 ANTENNA! With improved signal sensitivity and durability, the extended Immortal T antenna is the perfect companion for long range pilots with big big rigs. The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from…

TBS Crossfire Micro TX V2 Starter Set



CHF 119.90Weiterlesen

For a long time, our goal has been to not only be the best performing, but also the most affordable LRS on the market. With the TBS Micro TX V2 Starter Set, we have achieved this goal! There is no better time to get into TBS Crossfire than now with the completely refreshed hardware design…

TBS Crossfire Nano Diversity RX Adapter



CHF 5.90In den Warenkorb

his adapter board is designed to fit the Nano Diversity RX like a glove, hassle free and easy soldering. With this board you can enable connectivities with your servos via 8ch PWM and BST, just like the TBS CROSSFIRE 8Ch Diversity Rx. *RX not included. SPECIFICATION Weight: 5.73g Size: 37 x 25 x 10mm (With…

TBS Crossfire Immortal T Antenne V2



CHF 6.90In den Warenkorb

THE TBS IMMORTAL T V2 ANTENNA! With improved signal sensitivity and durability, the Immortal T v2 antenna is the perfect companion for race quads. The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from crashes.  The spring-steel element still carries the…

TBS Crossfire JR Adapter Kabel



CHF 4.90In den Warenkorb

Nur das Kabel.

TBS Crossfire TX Antenne V2



CHF 9.90In den Warenkorb

Introducing the Crossfire Stock TX V2 Antenna! We have listened to your complaints and made it extremely durable. In the process, we managed to improve the signal quality! Like the V1, this antenna can be used for both 868 and 915 applications, it can even be used as a receiver antenna!

TBS Crossfire Immortal T Antenne V2 Verlängert



CHF 6.90In den Warenkorb

THE EXTENDED TBS IMMORTAL T V2 ANTENNA! With improved signal sentitivity and durability, the extended Immortal T antenna is the perfect companion for long range pilots. The centerpiece housing is made out of a rubberized plastic material which will allow a certain degree of bending to further minimalize damage from crashes.  The spring-steel element still…

TBS Crossfire Diversity Nano RX



CHF 55.90In den Warenkorb

Yet again TBS is redefining long range flying! With the TBS Crossfire Diversity Nano RX we have taken the most powerful Crossfire receiver. Presenting the smallest full-fledged diversity receiver of any frequency, even boasting a power-redundancy circuit (battery not included!) TRUE DIVERSITY, FULL RANGE The TBS CROSSFIRE Diversity Nano Receiver is a compact R/C receiver…

TBS Crossfire Micro RX Kabelset



CHF 3.90In den Warenkorb

INCLUDES Micro RX to RC TBS Vendetta V1 to BST Cable TBS Crossfire Micro RX Receiver Adapter Cable Crossfire Micro RX to Powercube Cable CRSF Cable

TBS Crossfire TX Lite



CHF 165.40In den Warenkorb

The TBS CROSSFIRE TX LITE packs all the regular Crossfire technology. As it comes without a Bluetooth module, it’s perfect for FPV pilots who want to save a bit of money!

FrSky Taranis X-Lite JR TBS Crossfire Adapter 3D-Druckteil



CHF 12.00In den Warenkorb

This is an adapter for the TBS Crossfire Micro and Full TX, which will fits right on your FrSky Taranis X-Lite. Wiring All you need to know, how to wire it up, you can find on my Blog: English: https://blog.seidel-philipp.de/frsky-taranis-x-lite-remote-control/ German: https://blog.seidel-philipp.de/frsky-taranis-x-lite-fernsteuerung/​ Buy it If you don’t have access to a 3D printer, you can…

TBS Crossfire Micro RX V2 Adapter



CHF 3.90In den Warenkorb

SPECIFICATION Weight: 1.97g Size: 25 x 15 x 5.3mm (With Pins)

TBS Crossfire XF-Race Antenne 868MHz



CHF 6.90In den Warenkorb

The Crossfire RACE antenna is a new design for miniature setups or builds where weight is more critical than range. It will give you range about as good as a regular „Long Range 2.4GHz system“, but maintaining all of the low latency properties and other conveniences that you have come to expect from the Crossfire….

TBS Crossfire Micro RX V2



CHF 38.90In den Warenkorb

A super-tiny, super-lightweight UHF long range receiver. Perfect match for your mini- or micro-quads as well as 4ch aircraft. It now comes with a servo-adapter board for high-current servos and 4ch PWM connectivity (requires software update to your Crossfire TX!) Weight: 3.32g(V2) SIze:4×1.4×0.95(cm) INCLUDES 1x TBS Crossfire Micro Receiver 1x TBS Crossfire Micro RX Adapter…

TBS Crossfire Yagi 868mHz



CHF 53.90In den Warenkorb

SPECIFICATION Connector: SMA Male Connector Size: 305(L) x 60(H) x 160(W) Freqency: 868mHz

TBS Crossfire Nano RX



CHF 24.90In den Warenkorb

TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the minimum!). The end result is a full range receiver, at the…

TBS Crossfire Nano RX (SE) (mit Immortal T Antenne)



CHF 31.90In den Warenkorb

TBS is stepping up the Long Range / UHF game, with no competition in sight! With the TBS Crossfire Nano RX we condense 2 years of engineering experience, listening to our customer requirements, and pushing ourselves to the maximum (or in this case, the minimum!). The end result is a full range receiver, at the…

TBS Crossfire Diamond Antenne



CHF 25.90In den Warenkorb

THE TX ANTENNA TO RULE THEM ALL! Antenna orientation, wear & tear and non-directionality have been the source of some range issues with our long range and miniquad pilots. We therefore designed this antenna to be as durable as possible. A diamond lasts forever! MORE RANGE With a slight directionality to give you more range…

TBS Crossfire Micro RX Adapterkabel



CHF 2.90In den Warenkorb

6-pin TBS Crossfire Micro Receiver Cable that connects to the servo extender. 1 to 1 Molex Picoblade 1.25mm

TBS Crossfire Micro TX V2



CHF 79.90Weiterlesen

A NEW ERA OF CONNECTIVITY The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long…

TBS Crossfire Micro/Nano RX Empfänger Antenne



CHF 4.90In den Warenkorb

TBS CrossFire Tuned RX Antenne 90 Grad (1 Stück)



CHF 24.00In den Warenkorb

Ein Stück, Empfangsantenne, Handgetunet  

TBS CrossFire Tuned TX Antenne



CHF 24.00In den Warenkorb

Sendenatenne, Handgetunet  

TBS Crossfire TX



CHF 229.40In den Warenkorb

A NEW ERA OF CONNECTIVITY The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy, tiny receivers for FPV quads, the TBS CROSSFIRE contains the most modern technology to provide a superior long…

TBS Crossfire Diversity RX



CHF 135.90In den Warenkorb

TRUE DIVERSITY, FULL RANGE The TBS CROSSFIRE 8ch Diversity Receiver is a compact R/C receiver with 8ch PWM outputs (PPM, SBUS and CRSF capable), with best-in-industry noise-rejection and record-breaking range capability. It is the only receiver to provide true dual-input stage, chip based diversity, with the usual filtering and noise rejection from on-board video systems….

TBS MicroVee 868Mhz Crossfire Antenne



CHF 9.90In den Warenkorb

Dipoles – the most simple and oddly enough the most common in the FPV antenna. microVee-dipole – antenna with linear polarization, omnidirectional. Despite their simplicity, these antennas are still mostly used in modern UAVs.They can be used with the same dipoles on the ground (or regular antennas that comes in the kit),  panel antennas, antennas…

WhiteNoiseFPV X TBS Unify Nano/Crossfire Nano Mounting Board



CHF 5.90In den Warenkorb

The Nano-Nano board was designed to allow you to mount your Team BlackSheep Unify Pro Nano VTX in your stack for cleaner builds.  This board includes holes that are compatible with (but not limited to) most receivers such as the FrSky XM+ and Team BlackSheep Crossfire Nano.  Once the VTX is soldered into the cutout…

TBS Mambo Kickstand



CHF 21.90In den Warenkorb

Retrofit your Mambo with this black, slim, CNC-aluminum kickstand. Size-compatible with all Crossfire transmitter modules. Locks closed thanks to two spring-mounted balls, and rests your radio at a presentable angle away from dirt. Also, did we mention it’s black? MOUNTING INSTRUCTIONS: Screws into the back of the top 2 screw holes. As this screws directly…

Alpha A75 HD Whoop mit Caddx Nebula Nano Digital HD System (TBS BNF)



CHF 330.00In den Warenkorb

PRODUCT DESCRIPTION Let’s welcome the iFlight Alpha series, a new way to fly FPV. Ever wanted to try Digital FPV on the smallest possible whoop size quad? We sticked the caddx Vista and the new Polar Nano cam to one of our new 1.6inch whoop frames, did some tuning and tried to find the optimal…

TBS Mambo Starter Set



CHF 189.90In den Warenkorb

The TBS Mambo follows in the footsteps of the Tango 2, but sets a new focus: larger screen, traditional form factor with switches and potentiometers, JR module bay, replaceable batteries and trim buttons! A CLASS ON ITS OWN Team BlackSheep has redefined the portable remote control with the TBS Tango 2. Now we’re back with…

TBS Mambo – FPV RC Radio Drone Controller



CHF 139.90In den Warenkorb

The TBS Mambo follows in the footsteps of the Tango 2, but sets a new focus: larger screen, traditional form factor with switches and potentiometers, JR module bay, replaceable batteries and trim buttons! A CLASS ON ITS OWN Team BlackSheep has redefined the portable remote control with the TBS Tango 2. Now we’re back with…

BetaFPV Pavo30 HD Digital VTX Crossfire BNF



CHF 344.90 CHF 299.00In den Warenkorb

Pavo30 whoop quadcopter, a new concept of 3-inch pusher drone developed by BETAFPV, is going further in performance, durability and power with brand new power system. It’s powerful enough to carry SMO 4K camera or a customized Naked Camera for all FPV freestyle tricks, and also can carry a GoPro for some simple action flying….

TinysLEDs TBS Nano/Nano32 16×16 VTX Sled



CHF 3.90In den Warenkorb

16x16mm Mounting board TBS Nano VTXs and Crossfire Nano Rx Built for 16×16 M2 micro stacks SPECIFICATION Weight: .5 grams Board Dimensions: 20×20 Mounting Holes: 16 x 16 mm M2 hole size

TBS Podracer RTF/BNF Set



CHF 244.90In den Warenkorb

The TBS Podracer RTF/BNF Set is one of the most affordable  toothpick racer on the market today. Each unit is carefully built and tested by our experienced technicians, they will also be equiped with all the latest firmware to ensure you the most enjoyable FPV experience without having to build or upgrade firmwares. The TBS…

TBS Podracer AIO



CHF 74.90In den Warenkorb

TBS partnered with Zeez to make this awesome whoop AIO. Introducing the the TBS Podracer AIO, the board is designed to cater for TBS Pro32 Nano VTX and TBS Crossfire / Tracer Nano RX with direct pin-header installation. The result is a clean, compact and lightweight core for your build.. The FC is equipped with…

Beta95X V3 Whoop Quadcopter (HD Digital VTX) Crossfire BNF



CHF 309.90In den Warenkorb

Comes with brand new pusher design, equipped with Caddx Nebula Nano HD System, and supports to combine with the SMO 4K action camera, Beta95X V3 Whoop Quadcopter(HD Digital VTX) totally reinvents the traditional cinematic drones! It gives pilots an amazing HD flight experience, bringing pilots to a fairly clear image of every highlight moment! If…

TBS Toothpick Mounting Board



CHF 2.90In den Warenkorb

TBS Unify Pro32 Nano and Crossfire Nano RX mounting board for toothpick style rigs. (26 x 26 mounting pattern).

BetaFPV TWIG Mutant 4“ (Crossfire)



CHF 234.90In den Warenkorb

Specification Item: TWIG Mutant 4“ Weight: 148.3g (Excluded battery) FC&ESC: Toothpick F4 2-4S AIO FC 20A(BLHeli_S) V3 Motors: 1506 3000KV Brushless Motor Props: Gemfan 4032 3-Blade Props Camera: Caddx Ratel Camera VTX: A01 25-200mW 5.8G VTX Frame: TWIG Mutant Frame Canopy: Canopy for Mini Cam V3 Black Receiver Option: Frsky FCC/ Frsky LBT /TBS Crossfire Battery: 4S battery, like 450mAh 4S battery/850mAh 4S battery (Excluded) Flight…

TBS VTx Rx Plate



CHF 5.90In den Warenkorb

The TBS VTX RX Plate is designed to be mounted on the stack standoffs with a 30x30mm mounting pattern. It comes with plugs and cables for easy building and maintenance. *CRSF TX / RX between the VTX and RX are internally wired if you connect all the pins. Designed by TimoFPV SPECIFICATION Weight: 1.7g Mounting…

Menü