- The lightweight 4-inch toothpick below 250g even if you connect with the battery, meet the current requested of FAA rules.
- Assembled 4” frame kit, which adopts T700 carbon material becomes ultimate durability while maintaining minimal weight 24.43g.
- The first carbon fiber series installs Betafpv Toothpick 20A 2-4S AIO flight controller, which can supports up to 25A continuous currents.
- Integrates with 1505 3600KV motor, X-Knight offers unparalleled execution in thrust and control.
- Supports up to 850mAh 4S battery. It has plenty of power and punches to do all the tricks and flips you want.
- Weight: 129.6g (without battery)
- FC&ESC：20A Toothpick F4 2-4S AIO FC
- Motors: 1505 3600KV Brushless Motors
- Props: HQ 4025 2-Blade Props
- Camera: Caddx Ratel Camera
- VTX: A01 25-200mW 5.8G VTX
- Frame: X-Knight Carbon Fiber 4” Frame Kit
- Canopy: Canopy for Mini Camera V3
- Receiver Option: TBS Crossfire Nano RX
- Flight time: 3:30-7:30mins with XT60 4S battery
- 1505 3600kv motor hits the nice spot for high-powered 4s 4” toothpick builds with the ability to swing up to 4″ props with ease. Combined with 20A Toothpick F4 AIO FC, which will provide you enough output power.
SPECIFICATIONS OF CAMERA
- Image Sensor: 1/1.8″ Inch starlight HDR sensor
- Horizontal Resolution: 1200TVL
- FOV: 180 Degree
- Min. Latency: 8ms
- TV System: NTSC & PAL (changeable)
- Image: 16:9 & 4:3 (changeable)
- WDR: Super WDR (HDR)
- Min. Illumination: Starlight
- Synchronization: Internal
- Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
- S/N Ratio: >60dB (AGC OFF)
- Video Output: CVBS
- Camera OSD: Separate OSD
- DNR: 3-DNR
SPECIFICATIONS OF VTX
- A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.
- Output power: 25mW and 200mW (Adjustable)
- Smart Audio function is included for radio control
- Frequency: 5.8GHz 6 bands 37 channels
- 1 * X-Knight 4Inch Toothpick FPV Quad
- 1 * HQ 4025 2-Blade Props (4pcs)
- 1 * Set of M2*7 screws
Produkt darf in der Schweiz nicht betrieben werden. Nicht für schweizer Kunden.